SKU
NET-TPL-CPE210

TP-Link CPE210 2.4GHz 300Mbps 9dBi Outdoor CPE Wireless Access Point AP Repeater

Brand

TP-LinkTP-Link

TP-Link CPE210 2.4GHz 300Mbps 9dBi Outdoor CPE Access Point 27dBm 5km Passive PoE MIMO antenna...

MPN
CPE210
In stock
Special Price $79.00 Regular Price $87.30

TP-Link 2.4GHz 300Mbps 9dBi Outdoor CPE Access Point 27dBm 5km Passive PoE

TP-Link CPE210 2.4GHz 300Mbps 9dBi Outdoor CPE

Features:

  • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna
  • Adjustable transmission power from 0 to 25dBm/500mw
  • System-level optimizations for more than 5km long range wireless transmission
  • TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
  • Centralized Management System - Pharos Control
  • AP / Client / AP Router / AP Client Router (WISP) operation modes
  • Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
Learn more about Pharos Control >Learn more about Pharos Long-Range Outdoor Wireless Broadband>?Learn more about Omada Outdoor WiFi Solution>?

Specifications:

HARDWARE FEATURES

  • Processor :Qualcomm Atheros 560MHz CPU, MIPS 74Kc
  • Memory :64MB DDR2 RAM, 8MB Flash
  • Interface :1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
    1 Grounding Terminal
    1 Reset Button
  • Power Supply :Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
    Voltage range: 16-27VDC
  • Power Consumption :5 Watts Max
    Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
  • Dimensions ( W x D x H ) :224 x 79 x 60 mm
  • Antenna Type :Built-in 9dBi 2x2 Dual-polarized Directional Antenna
    Beam Width: 65° (H-Plane) / 40° (E-Plane)
    Note: For more details, please refer to datasheet
  • Protection :15KV ESD Protection
    6KV Lightning Protection
  • Enclosure :Outdoor ASA stabilized plastic material
    IPX5 waterproof Certification

WIRELESS FEATURES

  • Wireless Standards :IEEE 802.11b/g/n (with Pharos MAXtream disabled)
  • Proprietary Protocol :TDMA Mode (with Pharos MAXtream enabled)
  • Wireless Speeds :Up to 300Mbps (40MHz,Dynamic)
    Up to 144.4Mbps (20MHz,Dynamic)
    Up to 72.2Mbps (10MHz,Dynamic)
    Up to 36.1Mbps (5MHz,Dynamic)
  • Frequency :2.4~2.483GHz
    Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
  • Transmission Power :25dBm/316mw (Adjustable power by 1dBm)
    Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.

SOFTWARE FEATURES

  • Wireless Configurations :Pharos MAXtream TDMA Technology
    802.11b/g/n Modes
    Selectable Channel Width: 5/10/20/40MHz
    Automatic Channel Selection
    Transmission Power Control
    Dynamic Frequency Selection (DFS)
    WDS Enable/Disable
    Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
    SSID Broadcast Enable/Disable
    Multi-SSID with VLAN Tagging (AP mode only)
    Distance/ACK Timeout Setting
    Wireless MAC Address Filter
    Wireless Advanced:
    > Beacon Interval/RTS Threshold/Fragmentation
    >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
  • Management :Discovery and Remote Management via Pharos Control application
    HTTP/HTTPS Web-based management
    System Log
    SNMP Agent(v2c)
    Ping Watch Dog
    Dynamic DDNS
    SSH Server
  • System Tools :Wireless Signal Quality Indicators:
    Signal Strength/Noise/Transmit CCQ/CPU/Memory
    Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
    Spectrum Analyzer
    Speed Test
    Ping
    Traceroute
  • System-level Optimizations :Optimized IGMP Snooping/Proxy for multicast applications
    Hardware watch dog

POE ADAPTER FEATURES

  • Dimensions(W x D x H) :85.8x43.9x29.7 mm
  • Interfaces :1 AC Jack with Earth Ground
    1 10/100Mbps Shielded Ethernet Port (Power + Data)
    1 10/100Mbps Shielded Ethernet Port (Data)
  • Button :Remote Reset Button
  • Power Status LEDs :Green
  • Input :100-240VAC, 50/60Hz
  • Output :• V2.0: 24VDC, 0.6A Max
    • V3.0: 24VDC, 0.5A Max
    • V3.20: 24VDC, 0.25A Max

    +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
  • Efficiency :>80%
  • Certifications :CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

OTHERS

  • Certification :CE, FCC, RoHS, IPX5
  • Package Contents :Outdoor Wireless CPE
    24V 0.25A Passive PoE Adapter
    Pole Mounting Straps
    AC Power Cord
    Installation Guide
  • System Requirements :Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
    Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
  • Environment :Operating Temperature: -40?~70? (-40?~158?)
    Storage Temperature: -40?~70? (-40?~158?)
    Operating Humidity: 10%~90% non-condensing
    Storage Humidity: 5%~95% non-condensing
More Information
Color Black
Brand TP-Link
Product Type Extender
Write Your Own Review
You're reviewing:TP-Link CPE210 2.4GHz 300Mbps 9dBi Outdoor CPE Wireless Access Point AP Repeater
Close