Kingston KVR26S19S8/16 16GB 1x16GB DDR4 SODIMM 2666MHz CL19 1.2V Single Ranked 1Rx8 Value RAM

Kingston 16GB 1x16GB DDR4 SODIMM 2666MHz CL19 1.2V Single Ranked 1Rx8 Value RAM

Kingston 16GB (1x16GB) DDR4 SODIMM 2666MHz CL19 1.2V Single Ranked 1Rx8 Value RAM Notebook Laptop Memory

This document describes Value RAM's KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Dual-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.18' (30.00mm)
RoHS Compliant and Halogen-Free